background image

ENGLISH

There may be restrictions on using 
Bluetooth technology in some 

locations. Check with your local 
authorities or service provider.

Get started

The headset contains the following 
parts shown on the title page: green 
indicator light (1), multifunction key 
(2), charger connector (3), microphone 
(4), volume keys (5), and earloop (6).

Before using the headset, you must 
charge the battery and pair the 
headset with a compatible phone.

Note:

 Parts of the headset are 

magnetic. Metallic materials 
may be attracted to the 

headset. Do not place credit cards or 
other magnetic storage media near the 
headset, because information stored on 
them may be erased.

Chargers

Check the model number of any charger 
before using it with this device. The 

headset is intended for use with the 
AC-3, AC-4, and DC-4 chargers.

Warning:

 Use only chargers 

approved by Nokia for use 
with this particular 

enhancement. The use of any other types 
may invalidate any approval or warranty 
and may be dangerous.

For availability of approved 
enhancements, please check with your 
dealer. When you disconnect the power 
cord of any enhancement, grasp and pull 
the plug, not the cord.

Charge the battery

The headset has an internal, 
nonremovable, rechargeable battery. 
Do not attempt to remove the battery 

Summary of Contents for BH 202










Reviews: