The fully charged battery has power for up to 6 hours of talk time or up to 120 hours of
standby time.
When the battery charge is low, the headset beeps every 5 minutes, and the red
indicator light flashes. When the battery is charging, the red indicator light is on.
Check the battery charge
Make sure the headset is switched on, and press . A green light indicates a sufficient
charge level. If the light is yellow, you may need to recharge the battery soon. If the
light is red, recharge the battery.
Switch the headset on or off
Switch on
Press and hold for 2 seconds. The headset beeps, and a green indicator light flashes
once.
The headset connects to the last connected device. If you have never paired the headset
with a device, or you have cleared the pairings, pairing mode is activated.
Switch off
Press and hold for 5 seconds. The headset beeps, and a red indicator light flashes
once. All active calls are ended.
If not connected to a device within 30 minutes, the headset switches off.
Pair and connect the headset to your phone
Before using the headset, you must pair and connect it to a compatible phone.
1 To switch the headset off, press and hold for 5 seconds.
2 Switch on the phone to pair with.
3 If you have never paired the headset with a device, or you have cleared the pairings,
switch the headset on.
If you have previously paired your headset with a device, press and hold for 5
seconds.
Pairing mode is activated, and a green indicator light starts to flash quickly.
4 Within 3 minutes, activate Bluetooth on the phone, and set it to search for Bluetooth
devices. For details, see the user guide of the phone.
5 Select the headset from the list of found devices.
6 If required, enter the passcode
0000
.
4
