manualshive.com logo in svg

Nokia 9500 MPR, User Manual

The User Manual for the Nokia 9500 MPR is available for free download on our website. This comprehensive manual provides detailed instructions and valuable insights on how to maximize the functionalities of this remarkable device. Get the most out of your Nokia 9500 MPR by downloading the manual from manualshive.com.

Share
Download
background image

Provision port segregation/connectivity

394

WebEML User Manual

 

 

 

Provisioning port segregation/connectivity between a Core card Ethernet port and 
P8ETH or EASv2 card is limited to all Ethernet ports on the P8ETH or EASv2 card. 
Provisioning port segregation/connectivity from a specific Core card Ethernet port to 
a specific P8ETH or EASv2 Ethernet port is not supported.

Provisioning port segregation/connectivity between a P8ETH or EASv2 card 
Ethernet port is limited to the remaining Ethernet ports on the P8ETH or EASv2 card. 
Provisioning segregation/connectivity from a specific P8ETH or EASv2 port to a 
specific Core Ethernet port is not supported.

Provisioning port segregation/connectivity between an MSS-O Ethernet port is 
limited to the remaining Ethernet ports on the MSS-O. 

When parallel radio paths are supported by the same MSS shelf, provision port 
segregation between the radio paths at both NEs to prevent traffic from one radio 
path being transmitted back to the originating site on one of the other parallel radio 
paths. 

When parallel radio paths are created using P8ETH MPT-HL/MPT-HLC or EASv2 
MPT-HL/MPT-HLC ports, provision port segregation between the parallel MPT-HL/
MPT-HLC radio ports. For an example of the port segregation dialog box provisioned 
between P8ETH port 3.5 and port 3.8 (connectivity check box unchecked), see 

Figure 222

. For an example of port segregation window with P8ETH port 3.5 and port 

3.8 provisioned for port segregation, see 

Figure 223

.

When parallel radio paths are created using Core MPT-HL/HLC ports, provision port 
segregation between the parallel MPT-HL/HLC radio ports. Example of the port 
segregation dialog box provisioned between Core-E port 1.5 and port 1.6 
(connectivity check box unchecked), see 

Figure 224

. Example of port segregation 

window with Core-E port 1.5 and port 1.6 provisioned for port segregation, see 

Figure 225

.

When parallel radio paths are created using MPTACC MPT-HC/XP/HC-HQAM/XP-
HQAM/9558HC ports, provision port segregation between the parallel MPT-HC/XP/
HC-HQAM/XP-HQAM/9558HC radio ports. Example of port segregation window with 
port 6.1 and port 6.2 provisioned for port segregation, see 

Figure 226

.

When making Ethernet cross connections to one of parallel radio ports, port 
segregation should be provisioned between the Ethernet port and all other parallel 
radio ports.

When making a radio cross connections to one of parallel radio ports, port 
segregation should be provisioned between the radio port and all other parallel radio 
ports.

Port segregation should be provisioned between Ethernet ports and other Ethernet 
and/or radio ports where connectivity is not desirable.

Release 7.0.0 3DB 19286 ACAA Issue 01

Summary of Contents for 9500 MPR























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 9500 MPR

Hama Extra Operating Instructions Manual preview
Extra
Brand: Hama Pages: 37
Xoro DAB 55 User Manual preview
DAB 55
Brand: Xoro Pages: 16
Sirius Satellite Radio SL100PK1 Faq preview
SL100PK1
Brand: Sirius Satellite Radio Pages: 2
Lanzar VBD 1600MP Owner'S Manual preview
VBD 1600MP
Brand: Lanzar Pages: 12
G+M Elektronik GM-1525-AM Instructions Manual preview
GM-1525-AM
Brand: G+M Elektronik Pages: 23
Albrecht AE 6190 HD -X Operating Manual preview
AE 6190 HD -X
Brand: Albrecht Pages: 16
Monitor Audio AirStream 10 Instruction Manual preview
AirStream 10
Brand: Monitor Audio Pages: 36
Matsutec HP-528 User Manual preview
HP-528
Brand: Matsutec Pages: 25
Listen Technologies LR-400 Operation Instructions preview
LR-400
Brand: Listen Technologies Pages: 2
Makita GRM02 Instruction Manual preview
GRM02
Brand: Makita Pages: 28
Craftsman 315.EL2100 Operator'S Manual preview
315.EL2100
Brand: Craftsman Pages: 10
Craftsman 315.EL2200 Operator'S Manual preview
315.EL2200
Brand: Craftsman Pages: 14
Motorola APX900 2 Quick Reference Manual preview
APX900 2
Brand: Motorola Pages: 46
Motorola APX650005 User Manual preview
APX650005
Brand: Motorola Pages: 56
Motorola CLK User Manual preview
CLK
Brand: Motorola Pages: 44
Motorola APX NEXT User Manual preview
APX NEXT
Brand: Motorola Pages: 119
Motorola APX 6000 XE Overview preview
APX 6000 XE
Brand: Motorola Pages: 19
Motorola ASTRO APX 1000 Series User Manual preview
ASTRO APX 1000 Series
Brand: Motorola Pages: 94

Brands by name

Popular brands

Load more brands