nokia
C
ONNECTING
P
EOPLE
PAGE 11 (25)
Approved 1.0
CMO Sales and Marketing Customer Care EMEA
DJk
Technical Services, Repair Concepts CONFIDENTIAL
07.12.2004
Service Manual 9300 Level 1&2
Copyright © 2004 Nokia Corporation. All rights reserved.
8. SW-UPDATE
To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the
latest version of flash software, which is available on Nokia
Partner Web Site
/
Nokia Online.
Flash Concept – (Point of Sales)
It is very important to follow this insertion and
removal procedure, otherwise the contact pins of Flash
Adapter will be damaged.
The Flash Adapter is equipped with a movable part,
which is attached to the springs for fitting into the
battery holder.
1.) Remove the Sealing Plug carefully by using the
dental tool. Do not scratch the test pads.
2.) Insert by starting from Battery Spring side.
(NOT
from Battery Connector side)
To fix the Flash Adapter
first press the adapter spring and then connect the test
pins with the test pads of the device.
3.) Now, make sure that the contacts springs are
settled correctly.
1.) When removing the Adapter first release tension by
pressing as shown in the picture.
2.) Lift up the Adapter while holding the release
tension.
3.) Put back the Sealing Tape after the flashing.
