Nokia 9110i Communicator User Manual Download Page 107

Page: 107 / 188

10. Notes

Notes is used for writing texts and managing various documents stored on the
communicator.

Folders in the Notes main view are:

Own texts — Written mail, faxes, short messages, notes and memos

Received faxes/ messages/ mail — All received documents

Downloaded files — Documents downloaded with the Internet applications

Document outbox — Documents waiting to be sent

If you have a memory card inserted in the communicator, the memory card
icon will be shown at the bottom of the folders list. See figure 1.

To write a document

Press

Write note

. The note editor opens.

Write the document.

To read a document

Select a folder and press

Open

Select a document from the list and press

Open

Figure 1

Note:

When you open a document, the

document is opened in the appropriate
editor or viewer. The available commands
vary according to the editor/viewer.

Um_spock3.bk Page 97 Thursday, June 1, 2000 10:11 AM

Summary of Contents for 9110i Communicator



















































































































































































Search results

Summary of Contents for 9110i Communicator

Reviews:

Related manuals for 9110i Communicator

Brands by name

Popular brands

Nokia 9110i Communicator, User Manual

Search results

Summary of Contents for 9110i Communicator

Reviews:

Related manuals for 9110i Communicator

Brands by name

Popular brands