G e t s t a r t e d
13
Important:
Do not remove the memory card in the middle of an
operation when the card is being accessed. Removing the card in
the middle of an operation may damage the memory card as well
as the device, and data stored on the card may be corrupted.
■
Charge the battery
Your battery has been precharged, but
the charging levels may vary.
1. Connect the charger to a wall
outlet.
2. Connect the charger to the device.
You can use your device while it is
charging.
3. When the battery is fully charged,
disconnect the charger from the
device, then from the wall outlet to
save energy.
■
Switch your device on or
off
1. Press and hold the end key for at
least 4 seconds.
2. Enter the lock code or PIN code, if
necessary, and select
OK
. See "Security
settings", p. 44.
N8208_EN_MEA_RUIM_Generic_Gold_03182009.fm Page 13 Wednesday, April 1, 2009 12:25 PM