Copyright © 2004 Nokia. All rights reserved.
Tools
71
Start to fill in the settings from the top because depending on what data connection you
select (
Data bearer
) only certain setting fields are available.
•
Connection name
- Give a descriptive name for the connection.
•
Data bearer
- The options are
GPRS
or
Data call
. Depending on what data connection
you select, only certain setting fields are available. Fill in all fields marked with
Must
be defined
, or with an asterisk. Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, the network operator or service provider must
support this feature, and if necessary, activate it for your SIM card.
•
Access point name
(for packet data only) - The access point name is needed to establish
a connection to the GPRS network. You obtain the access point name from your
network operator or service provider.
•
Dial-up number
(for Data call only) - The modem telephone number of the access point.
•
User name
- Write a user name if required by the service provider. The user name may
be needed to make a data connection, and is usually provided by the service provider.
The user name is often case-sensitive.
•
Prompt password
- If you must key in a new password every time you log onto a server,
or if you do not want to save your password to the phone, choose
Yes
.
•
Password
- A password may be needed to make a data connection, and is usually
provided by the service provider. The password is often case-sensitive. When you are
writing the password, the characters you enter are shown briefly and then changed
to asterisks (*). The easiest way to enter numbers is to press and hold the digit you
want to enter, and then continue entering letters.
•
Authentication
-
Normal
/
Secure
.
•
Homepage
- Depending on what you are setting up, write either:
• the service address, or
• the address of the multimedia messaging centre.
