Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support
CONFIDENTIAL
10.Okt.2006
16
Service Manual 7373 RM-209
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(26)
DISASSEMBLY INSTRUCTION (LOWER BLOCK)
11.
1. Always protect all windows with a plastic film.
2. Remove the
E-COVER
.
3. If you need to change the
KEYMAT
, it is also possible at a
closed
LOWER BLOCK
. Remove the
KEYMAT
starting exactly from
the point shown.
4.
For assembly only:
When assembling, start placing the
KEYMAT
at button “0” and
move forward to the upper side.
5.
For assembly only:
Start placing the KEYMAT at the marked positions.
6.
For assembly only:
Be sure to have all clips locked properly.
7. Open the two Torx Plus® size 6 screw in the following order.
For assembly use the reverse order and apply a torque of 25
Ncm +/- 2Ncm
.
8. Open the middle snaps of the
D-COVER
, using a slotted screw-
driver.