M e s s a g i n g
30
Message sending
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
When you finish writing your message, to send the message, select
Send
.
The phone saves the message in the
Outbox
folder, and the sending starts.
If you select
Save sent messages
>
Yes
, the sent message is saved in the
Sent items
folder. See “General settings,” p. 40.
Note:
When the phone is sending the message, the animated
is shown.
This is an indication that the message has been sent by your device to the
message center number programmed into your device. This is not an
indication that the message has been received at the intended destination.
For more details about messaging services, check with your service provider.
It takes more time to send a multimedia message than to send a text
message. While the message is being sent, you can use other functions
on the phone. If an interruption occurs while the message is being sent,
the phone tries to resend the message a few times. If these attempts fail,
the message remains in the
Outbox
folder. You can try to resend it later.
Cancel message sending
To cancel the sending of the messages in the
Outbox
folder, scroll to the
desired message, and select
Options
>
Cancel sending
.
Read and reply to a MMS message
Important:
Exercise caution when opening messages. Multimedia message
objects may contain malicious software or otherwise be harmful to your
device or PC.
When you receive a new multimedia message,
Multimedia message received
or the number of new messages with
N messages received
is shown.
1. To read the message, select
Show
. To view it later, select
Exit
.
To read the message later, select
Menu
>
Messaging
>
Inbox
. Scroll
to the message that you want to view, and select it.
is shown if
you have unread messages in
Inbox
.
2. To view the whole message if the received message contains a
presentation, select
Play
.
To view the files in the presentation or the attachments, select
Options
>
Objects
or
Attachments
.
