Nokia 7368 ISAM ONT E-240G-B Product Manual Download Page 57

Page: 57 / 98

7368 ISAM ONT E-240G-B Product Guide

Install an E-240G-B ONU

Issue: 01

3FE-46261-AAAA-TCZZA

6 Install an E-240G-B ONU

6.1 Purpose

6.2 General

6.3 Prerequisites

6.4 Recommended tools

6.5 Safety information

6.6 ONU installation procedure

6.7 ONU mounting in an MNTS-A shelf

6.1 Purpose

This chapter provides the steps to install an E-240G-B ONU.

6.2 General

The procedure listed in this chapter describes mounting and cabling for the

E-240G-B ONUs.

For more information about installing EPON ONUs, see the Operations and

Commands manuals for your OLT.

6.3 Prerequisites

The prerequisites are:

•

The ONU software version must be in the NT file system.

•

All required cables must be present.

6.4 Recommended tools

You need the following tools for the installation:

•

#2 Phillips screwdriver

•

1/4 in. (6 mm) flat blade screwdriver

Release 06.01.01 | June 2019 | Edition 09

Summary of Contents for 7368 ISAM ONT E-240G-B


































































































Search results

Summary of Contents for 7368 ISAM ONT E-240G-B

Reviews:

Nokia 7368 ISAM ONT E-240G-B, Product Manual, Page: 57 / 98

Search results

Summary of Contents for 7368 ISAM ONT E-240G-B

Reviews: