Nokia 7368 ISAM ONT E-240G-B Product Manual Download Page 50

Page: 50 / 98

E-240G-B unit data sheet

7368 ISAM ONT E-240G-B Product Guide

3FE-46261-AAAA-TCZZA

Issue: 01

Figure 15

E-240G-B ONU connections

Table

describes the E-240G-B ONU physical connections.

Table 7

E-240G-B ONU physical connections

5.7 E-240G-B LEDs

Figure

shows the E-240G-B ONU LEDs.

DATA 1

DATA 2

DATA 3

DATA 4

ON/OFF

POWER

POTS 1

POTS 2

POTS ports

(RJ-14)

Gigabit Ethernet

ports (RJ-45)

On/off
button

Power

connector

SC/APC

connector

Ground lug

24108

Connection

Description

POTS

This connection is provided through RJ-14 ports.

Ethernet ports

This connection is provided through Ethernet RJ-45 cables. Four Ethernet connections are
supported.The Ethernet ports can support both data and in-band video services on all four
interfaces.

Power

This connection is provided through a power cable with a Molex connector to the power
connector.

Fiber optic

This connection is provided through a SC/APC fiber optic cable and connector.

Release 06.01.01 | June 2019 | Edition 09

Summary of Contents for 7368 ISAM ONT E-240G-B


































































































Search results

Summary of Contents for 7368 ISAM ONT E-240G-B

Reviews:

Nokia 7368 ISAM ONT E-240G-B, Product Manual, Page: 50 / 98

Search results

Summary of Contents for 7368 ISAM ONT E-240G-B

Reviews: