Nokia 7368 ISAM ONT E-240G-B Product Manual Download Page 33

Page: 33 / 98

7368 ISAM ONT E-240G-B Product Guide

ANSI ONU safety guidelines

Issue: 01

3FE-46261-AAAA-TCZZA

4 ANSI ONU safety guidelines

This chapter provides information about the mandatory regulations that govern the

installation and operation of the optical network terminals or units (ONTs or ONUs)

in the North American or ANSI market.

4.1 Safety instructions

This section describes the safety instructions that are provided in the ONU customer

documentation and on the equipment.

4.1.1

Safety instruction boxes in customer
documentation

The safety instruction boxes are provided in the ONU customer documentation.

Observe the instructions to meet safety requirements.

The following is an example of the Danger box.

The Danger box indicates that the described activity or situation may pose a threat

to personal safety. It calls attention to a situation or procedure which, if not correctly

performed or adhered to, may result in death or serious physical harm.

Do not proceed beyond a Danger box until the indicated conditions are fully

understood and met.

The following is an example of the Warning box.

The Warning box indicates that the described activity or situation may, or will, cause

equipment damage, loss of data, or serious performance problems. It identifies a

possible equipment-damaging situation or provides essential information to avoid the

degradation of system operations or data.

Do not proceed beyond a warning until the indicated conditions are fully understood

and met.

Danger —

Possibility of personal injury.

Warning 1 —

Possibility of equipment damage.

Warning 2 —

Possibility of data loss.

Release 06.01.01 | June 2019 | Edition 09

Summary of Contents for 7368 ISAM ONT E-240G-B


































































































Search results

Summary of Contents for 7368 ISAM ONT E-240G-B

Reviews:

Related manuals for 7368 ISAM ONT E-240G-B

Brands by name

Popular brands

Nokia 7368 ISAM ONT E-240G-B, Product Manual

Search results

Summary of Contents for 7368 ISAM ONT E-240G-B

Reviews:

Related manuals for 7368 ISAM ONT E-240G-B

Brands by name

Popular brands