Nokia 7368 ISAM ONT BGW320-505 Product Manual Download Page 42

Page: 42 / 48

Replace an BGW320-505 indoor ONT

7368 ISAM ONT BGW320-505 Product Guide

3FE-47753-AAAA-TCZZA

Issue: 01

5.4 Safety information

Read the following safety information before replacing the unit.

Danger 1 —

Hazardous electrical voltages and currents can

cause serious physical harm or death. Always use insulated

tools and follow proper safety precautions when connecting or

disconnecting power circuits.

Danger 2 —

Make sure all sources of power are turned off and

have no live voltages present on feed lines or terminals. Use a

voltmeter to measure for voltage before proceeding.

Danger 3 —

Always contact the local utility company before

connecting the enclosure to the utilities.

Warning 1 —

This equipment is ESD sensitive. Proper ESD

protections should be used when removing the fiber access

cover of the indoor ONT.

Warning 2 —

Do not directly connect the 10G PON ONT to the

10G PON OLT.

Caution —

Keep indoor ONTs out of direct sunlight. Prolonged

exposure to direct sunlight can damage the unit.

Note 1 —

Observe the local and national laws and regulations

that may be applicable to this installation.

Note 2 —

Observe the following:

•

The indoor ONT should be installed in accordance with the

applicable requirements of the NEC or CEC. Local

authorities and practices take precedent when there is

conflict between the local standard and the NEC or CEC.

•

The indoor ONT may require the presence of fiber

termination, which must be installed by qualified service

personnel.

•

Indoor ONTs must be installed with cables that are suitably

rated and listed for indoor use.

•

See the detailed specifications in the

BGW320-505 unit data

sheet

for the ONT temperature ranges for these ONTs.

Release 06.02.00b | October 2019 | Edition 01

Summary of Contents for 7368 ISAM ONT BGW320-505
















































Search results

Summary of Contents for 7368 ISAM ONT BGW320-505

Reviews:

Related manuals for 7368 ISAM ONT BGW320-505

Brands by name

Popular brands

Nokia 7368 ISAM ONT BGW320-505, Product Manual

Search results

Summary of Contents for 7368 ISAM ONT BGW320-505

Reviews:

Related manuals for 7368 ISAM ONT BGW320-505

Brands by name

Popular brands