Taking care of your device
Your device is a product of superior design and craftsmanship and should be treated
with care. The following suggestions will help you protect your warranty coverage.
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
•
Do not store the device in high or cold temperature. High temperatures can
shorten the life of electronic devices, damage batteries, and warp or melt
certain plastics. When the device warms to its normal temperature from a cold
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
Do not attempt to open the device other than as instructed in this guide.
•
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device. Only use a soft, clean, dry cloth to clean the surface of the device.
•
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
•
Use only the supplied or an approved replacement antenna. Unauthorised
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•
Use chargers indoors.
•
Backup all data you want to keep, such as contacts and calendar notes.
•
To reset the device from time to time for optimum performance, power off the
device and remove the battery.
These suggestions apply equally to your device, battery, charger, or any accessory.
Recycle
Always return your used electronic products, batteries, and packaging materials to
dedicated collection points. This way you help prevent uncontrolled waste disposal
and promote the recycling of materials. Check product environmental information
and how to recycle your Nokia products at www.nokia.com/werecycle, or
nokia.mobi/werecycle.
China ROHS Table
Toxic or hazardous Substances and
Elements
Part name
Phone
Battery
Accessories
Lead (Pb)
X
X
X
Mercury (Hg)
O
O
O
Cadmium (Cd)
O
O
O
Hexavalent Chromium (Cr6+)
O
O
O
Polybrominated biphenys(PBB)
O
O
O
Polybrominated diphenyl
ethers (PBDE)
O
O
O
O: Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement in SJ/T
11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T
11363-2006.
Notes: The reason for marking "X" is: there is currently no alternative technologies
available.
Additional safety information
Note:
The surface of this device does not contain nickel in the platings. The surface
of this device contains stainless steel.
60
Taking care o
f your de
vice
© 2009 Nokia. All rights reserved.
