highlighted), then you could either
press the number key matching to the
predictive character numbering to
input it, or scroll in the relevant
direction to find and highlight your
desired predictive character and then
press the scroll key to input it.
When you do not need the predictive
list or you could not find your desired
Chinese character in the predictive
list, while the predictive list is not
activated, you could directly input the
Pinyin for next Chinese character.
While the predictive list is already
activated, you have to press the right
selection key to close the predictive
list first and then continue to input
the Pinyin for the next Chinese
character.
Pinyin input example: To input
characters for "Pinyin"
1 Enter into the text editing window for
writing a text message or any other
possible position for inputting
Chinese character, and switch to
Pinyin input mode.
2 Input the Pinyin letter pin for "pin":
press
7
,
4
,
6
in sequence, and finally
input
*
once for the 1st tone.
3 Scroll right to highlight pin- and then
press the scroll key to activate the
candidate list.
4 The character for "pin" will be shown
in the candidate list. If this character
locates in the first highlighted
position of the candidate list, you
could directly press the scroll key to
input it, otherwise, you should first
scroll right to highlight this character
and then press the scroll key to input
it.
5 After you input the character for "pin",
the predictive list will be shown, and
the character for "yin" is shown in the
predictive list. You could use the same
method described in item 4 to input
this character.
Stroke input method
The strokes are classified according to the
following table.
Use Stroke input method
1 Input strokes: The strokes
constituting Chinese characters have
been divided into five categories:
Horizontal, Vertical, Left-falling, Dot
and Turning. Each category
corresponds to a number key
respectively
1
,
2
,
3
,
4
,
5
.
You could press the number keys to
input the strokes according to the
standard stroke order. When you start
inputting, the Chinese input window
will be shown on the screen, which
shows your input strokes and the
Write text 27
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
