background image

 

6303 Classic RM-443

Service Manual Level 1&2

 

3

  

 

 

      CONFIDENTIAL  

    

1.

 

CHANGE HISTORY 

Status Version 

No. 

Date  Comments 

Draft 0.1  30.01.2009 

First 

draft 

Approved 

1.0 

31.03.2009 

First approved version 

Approved 

2.0 

05.06.2009 

Steps 32 and 33 in the 
disassembly instructions  
have been removed as 
the earpiece is not  a 
spare part. The screw 
order in the Assembly 
hints has been updated. 

 

The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to 
carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA 
service suppliers, and the content of it is confidential. Please note that NOKIA provides also 
other guidance documents (e.g. Service Bulletins) for service suppliers, follow these regularly 
and comply with the given instructions. 

While every endeavor has been made to ensure the accuracy of this document, some errors 
may exist. If you find any errors or if you have further suggestions, please notify NOKIA using 
the address below: 

CMO Operation & Logistics 
Training and Vendor Development 
Multimedia Creation & Support 

mailto:[email protected]

 

Please keep in mind also that this documentation is continuously being updated and modified, 
so watch always out for the newest version. 

 

Issue 2  

 

         

Copyright © 2009

 

NOKIA. All rights reserved. 

 

Summary of Contents for 6303 classic






















Reviews: