Nokia 6300 Sport, User Manual

Page: 24 / 98

23 Copyright © 2006 Nokia. All rights reserved.
C a l l f u n c t i o n s
23
1. In the standby mode, press and hold the right
selection key or, press and hold the volume down key.
A short tone is played, and
Speak now is displayed.
2. Say the voice command clearly. If the voice
recognition is successful, a list with matches is
shown. The phone plays the voice command of the
match on the top of the list. If the result is not the
correct one, scroll to another entry.
Using voice commands to carry out a selected phone
function is similar to voice dialing. See
Voice commands
in ”My shortcuts” p. 46 .
■
Answer or reject a call
To answer an incoming call, press the call key. To end
the call, press the end key.
To reject an incoming call, press the end key. To mute
the ringing tone, select
Silence .
Call waiting
To answer the waiting call during an active call
(network service), press the call key. The first call is put
on hold. To end the active call, press the end key.
To activate the Call waiting function, see ”Call” p. 51 .
■
Options during a call
Many of the options that you can use during a call are
network services. For availability, contact your service
provider.
During a call, select Options and from the following
options:
Call options are Mute or Unmute , Contacts , Menu , Lock
keypad , Record , Voice clarity , Loudspeaker or Handset .
Network services options are Answer or Reject , Hold or
Unhold , New call , Add to conference , End call , End all
calls , and the following:
Send DTMF — to send tone strings
Swap — to switch between the active call and the call
on hold
Transfer — to connect a call on hold to an active call
and disconnect yourself
Conference — to make a conference call
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.