35
Set up 1-touch dialing
You can associate any entry in the contacts list with a key from 2-9. To dial those entries,
press and hold the assigned key. See "Set up 1-touch dialing," p. 35 to activate or deactivate
1-touch dialing.
Assign a key to 1-touch dialing
1. In the standby mode, select
Menu
>
Contacts
>
1-touch dialing
.
2. Scroll to an
(empty)
slot, and select
Assign
.
3. Enter the number (including the area code) and a name for the number, and select
OK
;
or select
Search
to retrieve a number from the contacts list.
If 1-touch dialing is off, the device displays a prompt and asks if you want to turn speed
dialing on.
4. Select
Yes
to activate 1-touch dialing.
Change speed dialing numbers
1. In the standby mode, select
Menu
>
Contacts
>
1-touch dialing
.
2. Scroll to the 1-touch dialing entry you want to change, and select
Options
>
Change
.
3. Enter the new number and a name for the entry, and select
OK
; or select
Search
to retrieve
a number from the contacts list.
Delete 1-touch dialing numbers
1. In the standby mode, select
Menu
>
Contacts
>
1-touch dialing
.
2. Scroll to the entry you want to delete, and select
Options
>
Delete
>
Yes
.
■
Voice tags
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note the following:
•
Voice tags are not language-dependent. They depend on the speaker’s voice.
•
You must say the name exactly as you said it when you recorded it.
•
Voice tags are sensitive to background noise. Record voice tags, and use them in a
quiet environment.
•
Very short names are not accepted. Use long names and avoid similar names for
different numbers.
Note:
Using voice tags may be difficult in a noisy environment or during an emergency,
so you should not rely on voice dialing in all circumstances.
