47
If your battery has been removed or has discharged outside the digital network, you may be
prompted to enter the time manually (when the battery is replaced or recharged, and you
are still outside of the digital network).
■
Call settings
Location info sharing
Location info sharing is available for the Nokia 6275i device. Location info sharing is a network
service. See "Network services," p. 5.
If your wireless service provider supports this feature, then location info sharing allows the
device to share position information over the network. For calls to emergency numbers, this
position information may be used by the emergency operator to determine the position of
the device. The functionality and accuracy of this feature are dependent on the network,
satellite systems, and the agency receiving the information. This feature may not function in
all areas or at all times.
In the standby mode, select
Menu
>
Settings
>
Call
>
Location info sharing
>
Emergency
or
On
.
Emergency
—This is the default profile. The device location information is shared only during
an emergency call to the official emergency number programmed into your device. The screen
displays
in the upper left hand corner in the standby mode.
On
—The device location information is shared with the network whenever the device is powered
on and activated. The screen displays
in the upper left hand corner in the standby mode.
Location information will always be shared with the network during emergency calls to the
official emergency number programmed into the device, regardless of which setting is selected.
After placing an emergency call the device remains in emergency mode for 5 minutes. During this
time, the location information will be shared with the network. See "Emergency calls," p. 78.
Anykey answer
Anykey answer enables you to answer an incoming call. Briefly press any key except the right
selection or end key. In the standby mode, select
Menu
>
Settings
>
Call
>
Anykey answer
>
On
or
Off
.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy signal when
you dial. With automatic redial activated, your device redials the number (number of times is
specified by the network), and notifies you when the network is available. In the standby mode,
select
Menu
>
Settings
>
Call
>
Automatic redial
>
On
or
Off
.
1-touch dialing
You can activate or deactivate 1-touch dialing. In the standby mode, select
Menu
>
Settings
>
Call
>
1-touch dialing
>
On
or
Off
.
