Nokia 6233 - Cell Phone 6 MB, User Manual, Page: 71 / 123

71 Copyright ©
2006 Nokia. All rights reserved
.
Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress
(network service). See “Call waiting,” p. 33 .
Summary after call > On — to briefly display the approximate duration and cost (network service) of the call
after each call
Send my caller ID > Yes — to show your phone number to the person you are calling (network service). To use
the setting agreed upon with your service provider, select Set by network .
■
Phone
Select Menu > Settings > Phone and from the following options:
Language settings — to set the display language of your phone, select Phone language . If you select Automatic ,
the phone selects the language according to the information on the SIM card.
To select the USIM card language, select SIM language .
To set a language for the voice playback, select Voice playback language . See “Make a voice dialing call,” p. 32
and Voice commands in “My shortcuts,” p. 62 .
Memory Status — to see how much of the phone’s memory is reserved and how much is free.
Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the
phone is in the standby mode and no function of the phone has been used. Select On , and set the time.
Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the
security code, and select On .
When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Welcome note — to write the note you would like to be shown briefly when the phone is switched on.
Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM. You cannot access this option during an
active call.