S e t t i n g s
46
USB data cable
You can use the USB data cable to transfer data between the memory card inserted
in the phone and a compatible PC or a printer supporting PictBridge. You can also
use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing, connect the data
cable; when the phone displays
USB data cable connected. Select mode.
, select
OK
and one of the following options:
Default mode
— to use the cable for Nokia PC Suite
Printing
— to print pictures directly from the phone using a compatible printer.
Data storage
— to activate the memory card for data transfer
To change the USB mode, select
Menu
>
Settings
>
Connectivity
>
USB data
cable
>
Default mode
,
Printing
, or
Data storage
.
■
Call
Select
Menu
>
Settings
>
Call
and one of following options:
Call forwarding
— to forward your incoming calls (network service).
Call forwarding and call restrictions cannot be active at the same time.
See
Call restrictions
in ”Security,” p. 49.
Anykey answer
>
On
— to answer an incoming call by briefly pressing any key,
except the left and right selection keys, volume key, camera key, or the end key.
Answer when fold is opened
>
On
— to set your phone to answer a call when you
open the fold. If the setting is off, you must press the call key after you open the fold.
Automatic redial
>
On
— to set your phone to make a maximum of 10 attempts
to connect the call after an unsuccessful call attempt.
1-touch dialing
>
On
and the names and phone numbers assigned to the
1-touch dialing keys,
2
to
9
. To dial, press and hold the corresponding number key.
Call waiting
>
Activate
— to set the network to notify you of an incoming call
while you have a call in progress (network service). See ”Call waiting,” p. 21.
Summary after call
>
On
— to briefly display the approximate duration and cost
(network service) of the call after each call.
Send my caller ID
>
Yes
— to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service
provider, select
Set by network
.
