Nokia FastMile 4G Receiver Product Overview
Management using the Web UI
Issue: 01 DRAFT
3TG-00386-ABAA-TCZZA
95
DRAFT
14 Management using the Web UI
14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver
14.2 Using the Web UI status screen
14.3 Using the Web UI network screen
14.4 Using the Web UI system screen
14.1 Using the Web UI to manage the Nokia
FastMile 4G Receiver
After the Nokia FastMile 4G Receiver has been installed, you can use the Web UI to
perform some management-type activities on a Nokia FastMile 4G Receiver that is
managed by an ACS through TR-069. See section
6.1.2
for more information about
the Web UI.
The Web UI provides the following screens to provide support for management of
the Nokia FastMile 4G Receiver:
•
Status screen: allows viewing of FastMile 4G Receiver status parameter values,
see section
14.2
•
Network screen: allows configuration of specific FastMile 4G Receiver
parameters (login is required), see section
14.3
•
System screen: allows performing of advanced system actions (login is required),
see section
14.4
14.2 Using the Web UI status screen
The Web UI status screen allows you to view FastMile 4G Receiver status
parameters. No login is required.
The following parameters are shown:
•
The attached cell
•
The Signal Strength of the attached cell: This animated model shows the RSRP
(Reference Signals Received Power) of the attached cell
•
The RSSI (Received Signal Strength Indication) of the attached cell
•
The RSRQ (Reference Signal Received Quality) of the attached cell
•
The SINR (Signal to Interference and Noise Ratio) of the attached cell