manualshive.com logo in svg

Nokia 3500 classic RM-272, Service Manual

Share
Download
Nokia 3500 classic RM-272 Service Manual Download Page 87

 Baseband manual tuning guide

Certificate restoring for BB5 products

Context

This procedure is performed when the device certificate is corrupted for some reason.
All tunings (RF & Baseband, UI) must be done after performing the certificate restoring procedure.
The procedure for certificate restoring is the following:
• Flash the phone with the latest available software using FPS-20 or FPS-10.
• Create a request file.
• Send the file to Nokia by e-mail. Use the following addresses depending on your location:

• APAC: [email protected]
• CHINA: [email protected]
• E&A: [email protected]
• AMERICAS: [email protected]

• When you receive a reply from Nokia, carry out certificate restoring.
• Tune the phone completely.

Note: 

SX-4 smart card is needed.

• If the phone resets after certificate restoring, reflash the phone again.
Required equipment and setup:
•

Phoenix

 service software v 2007.9.1.261 or newer.

• The latest phone model specific 

Phoenix

 data package.

• PKD-1 dongle
• SX-4 smart card (Enables BB5 testing and tuning features)
• External smart card reader

Note: 

The smart card reader is only needed when FPS-20 is used. FPS-10 has an integrated smart

card reader.

• Activated FPS-20 flash prommer OR FPS-10 flash prommer
• Flash update package 007.007.016 or newer for FPS-20 or FPS-10 flash prommers
• CU-4 control unit
• USB cable from PC USB Port to CU-4 control unit
• Phone model specific adapter for CU-4 control unit
• PCS-1 cable to power CU-4 from external power supply
• XCS-4 modular cable between flash prommer and CU-4

Note: 

CU-4 must be supplied with +12 V from an external power supply in all steps of certificate

restoring.

Steps

1. Program the phone software.

i

Start 

Phoenix

 and login. Make sure the connection has been managed correctly for FPS-20 or FPS-10.

ii Update the phone MCU software to the latest available version.

If the new flash is empty and the phone cannot communicate with 

Phoenix

, reflash the phone.

RM-272; RM-273

BB Troubleshooting and Manual Tuning Guide

Issue 1

COMPANY CONFIDENTIAL

Page 3 –43

Copyright © 2007 Nokia. All rights reserved.

Summary of Contents for 3500 classic RM-272

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands