Settings
89
Copyright
©
2005 Nokia. All rights reserved.
4. Press the end key to return to standby mode; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card for instructions.
5. Press and hold the call key for a few seconds until
Card call
appears.
6. When you hear the tone or system message, select
OK
.
International prefix
You can store an international dialling prefix into your device. In standby mode,
select
Menu
>
Settings
>
Call
>
International prefix
.
In standby mode, when you enter + (press * twice) at the beginning of a phone
number, your device automatically inserts the international dialling prefix that
you have stored after you press the call key. See
Insert dialling codes
p.
56
.
Data or fax calls
Data and fax calling is a network service. See
Network services
p. viii. If your
wireless service provider or network operator supports this feature, you can set up
the device to send or receive data and fax calls with a terminal, such as a PDA or
PC, connected.
For better performance during data calls, place the device on a stationary surface.
Do not move the device by holding it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide
which can be downloaded from the Nokia Web site at
www.nokia.com.
9246705_en_1_web.fm Page 89 Friday, December 30, 2005 12:10 PM