
M e s s a g i n g
73
FCC DRAFT
1. Select
Menu
>
Contacts
>
1-touch dialing
.
2. Scroll to an
(empty)
1-touch dialing slot, and select
Assign
.
3. Enter your mailbox phone number, including the area code.
4. Enter any dialing codes as necessary after the entered phone number.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.
5. Enter any remaining pauses or other information that enables you to listen to
your messages, and select
OK
.
6. Enter a name (such as voice mail), and select
OK
.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
Insert dialing codes
Press
*
repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly, and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions
p—Pauses for 2.5 seconds before sending any numbers that follow
+—Replaced by the international access code
w—Waits for you to press the send key before sending the numbers or codes
that follow
Clear voice mail icon
To clear the voice mail icon from the display, select
Menu
>
Messaging
>
Voice
messages
>
Clear voice message icon
.
Summary of Contents for 2365i
Page 1: ...1 FCC DRAFT Nokia 2365i User Guide ...
Page 88: ...I n d e x 88 FCC DRAFT ...