O r g a n i z e r
70
2. Enter the time (in hh:mm format), and select
OK
.
3. Enter a note for the timer, and select
OK
.
The
icon appears in the standby mode when the countdown timer is set.
When the time runs out, your device sounds an alarm, displays the timer note,
and flashes its lights.
•
Press any key during the alarm to stop the timer.
•
After 30 seconds the timer alert expires automatically.
Change the time
After you have set the timer, you can change the time.
1. In the standby mode, select
Menu
>
Organizer
>
Countdown timer
>
Set
timer:
.
2. Enter the new time, and select
OK
.
3. Leave the note as it was, or enter a new note, and select
OK
.
Stop the timer
After you have set the timer, you can stop the timer at any time.
In the standby mode, select
Menu
>
Organizer
>
Countdown timer
>
Stop timer
.
■
Stopwatch
Your device has a stopwatch that displays time in hours, minutes, seconds, and
fractions of a second in hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Measure time
1. In the standby mode, select
Menu
>
Organizer
>
Stopwatch
>
Split timing
or
Lap timing
>
Start
. The running time is displayed on the screen.
2. Select
Split
to note the lapsed time.
The timer continues to run. The split time appears below the running time. If
you split the time more than once, the new measured time appears at the
beginning of the list. Scroll to see previous measured times.
Bravo_R210_Verizon_080205.fm Page 70 Monday, August 8, 2005 8:59 AM
