Figure 107 Auto tuning concept with CMU200
Figure 108 Auto tuning concept with RX and TX tuning devices and splitter
Copy the two phone specific ini-files, for example rm_13_tunings.ini and autotune_RM-13.ini, to a phone specific
folder, for example \Phoenix\products\RM-13\.
Steps
1. Make sure the phone (in the jig) is connected to the equipment. Else, some menus will not be shown in
Phoenix.
2. The first time you are using automatic tuning on this phone model, on this computer, you will have to Set
loss for cables and jigs.
3. To go to autotune, select Tuning (Alt-U) > Auto-Tune (Alt-A) from the menu.
4. If you need more assistance, please refer to the Phoenix Help.
Receiver
General instructions for GSM 900 RX troubleshooting
Steps
1. Connect the phone to a PC with the module repair jig.
2. Start Phoenix and establish a connection to the phone with the data cable e.g. FBUS.
3. Select File and Scan product.
RH-64
RF troubleshooting
Nokia Customer Care
9243363 (Issue 1)
Company Confidential
Page 7–7
Copyright ©2005 Nokia. All Rights Reserved.