Nokia 02701V5 User Manual Download Page 7

ENGLISH

To switch the call between the 
headset and a compatible phone, 
press and hold the answer/end key.

Clear settings or reset

To clear all the pairing settings from 
the headset, switch off the headset, 
and press and hold the power key and 
the answer/end key until the red and 

green indicator lights start to 
alternate.

To reset the headset if it stops 
functioning, although it is charged, 
plug the headset into a charger, and 
press the power key and the answer/
end key at the same time.

Battery information

Your device is powered by a rechargeable 
battery. The battery can be charged and 
discharged hundreds of times, but it will 
eventually wear out. Recharge your 
battery only with Nokia approved 
chargers designated for this device.

Unplug the charger from the electrical 
plug and the device when not in use. Do 
not leave a fully charged battery 
connected to a charger, since 
overcharging may shorten its lifetime. If 
left unused, a fully charged battery will 
lose its charge over time.

Never use any charger that is damaged.

Leaving the device in hot or cold places, 
such as in a closed car in summer or 
winter conditions, will reduce the 
capacity and lifetime of the battery. 
Always try to keep the battery between 
15°C and 25°C (59°F and 77°F). A device 
with a hot or cold battery may not work 
temporarily, even when the battery is 
fully charged. Battery performance is 
particularly limited in temperatures well 
below freezing.

Summary of Contents for 02701V5










Reviews: