Noise Engineering
Zularic Repetitor
Dynamic Rythmic Generator
Interface
MOTHER (knob)
e MOTHER knob selects the pattern set that is output. e MOTHER knob
acts as a scalar for the MOTHER CV. e current patch is displayed on the LEDs
near the center top. A key to the patterns is included later in the manual.
CHILD 1-3 (knob, input CV)
e CHILD knobs control the offset in beats of each part versus the mother
rhythm. e knob acts as a scalar for the input CV.
WORLD
e WORLD switch selects which bank of patterns to use. ey are grouped by
world. Old world contains Indian, African and African relatives such as Vodou.
New world contains Funk, Rock and other more modern rhythms. e status of
the WORLD switch is indicated by the orange LED.
BEAT
e BEAT input is a clock input that advances the time on the rising edge
and returns any active gates to zero on the falling edge.
MEASURE
e MEASURE input resets the beat to the start of the measure on a rising edge.
RST
e RST button will pause the advancement of time while depressed and when
released reset the time back to the start of the measure.
MOTHER (output)
MOTHER outputs a 6v low impedance gate suitable for controlling most any gate
driven device.
CHILD 1-3 (output)
CHILD outputs a 6v low impedance gate suitable for controlling most any gate
driven device.
Mother
Child 1
Child 2
Child 3
Beat
Measure
RST
Zularic
Repetitor
Mother
Child 2
Child 1
Child 3
World
New
Old
2
