background image

8

www.noirot.com.au

WARRANTY REGISTRATION:

IMPORTANT:

To validate your product warranty, you are required to do the following:

1.

Register your product online at

www.noirot.com.au

, click on “Product Registration” and

fill out the required fields.

2.

You must also retain your receipt of purchase

WARRANTY CONDITIONS

Your Noirot Spot Plus electric panel heaters comes with a

LIFETIME WARRANTY

, therefore

any replacement of faulty parts or repairs of any kind must be carried out by a qualified person
and authorised by Noirot Australia Pty Ltd or their approved representative. Failure to do so will

VOID

the

WARRANTY

.

Noirot Australia Pty. Ltd. reserve the right to reject any warranty claim deemed to be false.
Retailers must have warranty claims authorised by a representative of Noirot Australia.
If you believe your product to be faulty and under warranty you are required to do the following:

1.

Return the product, at your expense, to the place of purchase for assessment by an
authorised representative of Noirot Australia.

2.

This may require leaving the product at the place of purchase.

3.

If the product is deemed faulty and under warranty, the place of purchase of the
product will order a replacement heater to which Noirot Australia, at our cost, will
deliver the heater to the place of purchase.

4.

The consumer will then be required, at their cost, to pick up the replacement heater
from the place of purchase.

5.

If the heater is faulty but not deemed to be under warranty, an explanation will be
provided to the consumer and that the faulty heater can be picked up by the customer
from the place of purchase.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.

If you have any queries regarding your product or its warranty please contact:

Noirot Australia Pty Ltd

80-84 Burlington St
Oakleigh Victoria 3166
Australia

P:

1 300 664 768

E:

[email protected]

Noirot New Zealand Pty Ltd

C/- Key Service Ltd
34 A Cryers Road
East Tamaki, Auckland 2013

P:

(09) 476-7981

E:

[email protected]

Summary of Contents for 7358-3T









Reviews: