Nogueira TN-10, Instruction Manual

Page: 21 / 54

Observe the correct assembling position of the cardan parts.
The spring pins (5) of the tube’s cross-heads and the bar should be in the same direction,
according to the picture below.
5
5
Greater than
L/3
L
Attention:
1) Failure in complying with minimum measures of cardan shaft (see figure), can
cause its burst and throw parts to any direction.
2) The misalignment of the cardan shaft will cause high level of vibration and the
cardan burst, which may cause serious injuries to the people nearby.
21 TN-10
E
n
g
li
s
h