NODOR D1050BKHK, User Manual, Page: 23 / 28

WARMING DRAWER D1050BKHK
BEFORE THE FIRST TIME USE
•
When using the appliance for the first time. Clean it as follows:
•
Clean the surface with a soft cloth and then dry it.
•
Pre-heat the empty drawer for at least two hours. Turn the temperature knob to the maximum
setting, in order to eliminate any residual grease, oil, or manufacturing resins which may cause
unpleasant odours during heating.
•
Air out the room.
•
Upon completion of this operation, the appliance is ready to be used for the first time.
APPLIANCE CONTROLS
•
The control elements are the temperature knob and the luminous
ON-OF switch.
•
With the switch pressed (position 1), the drawer is on, whereas
when the switch is released (position 0), the drawer is off.
•
These parts can be seen only when the drawer is open.
•
When the drawer is closed, a control light located on the front of
the appliance lets yu see whether the drawer is ON.
OPERATION
•
The drawer be opened by push/pull function
•
Place the dishes in the drawer
•
Select a temperature
•
Turn on the appliance and the switch will light up
•
Close the drawer gently
•
Turn off the appliance before removing the heated dishes.
TECHNICAL DATA
Input Voltage : 220V ~ 240V / 50Hz
Rating Power : 380W ~ 460W