13
ND-FRULLY500 User Manual
HOW TO USE
Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. Assembling the jar assembly (including the measure cup, lid, seal ring, blade assembly and
jar base) into the motor unit. Disassemble to wash all detachable parts except the motor unit.
Refer to the latter chapter CARE AND CLEANING.
3. Reassemble them after cleaning and drying thoroughly all parts
1) Inverting the jar onto a level surface and holding the jar handle, then putting the seal ring
and blade assembly onto the jar base bottom and secure the blade assembly by turning it
anti-clockwise until tight (See Fig.3)
2) Re-position the jar assembly with its opening upwards. Wrap the seal ring around the lid
bottom and put the lid onto the jar assembly. Place the measure cup exactly into the lid by
fitting the small projection on the both sides of the cup into the slots of the lid. (See Fig.4).
3) Finally, adjust the connector on the jar bottom well, and place the assembled jar assembly
to the motor base with handle towards the direction of the unlocking sign, then tighten to the
locking sign (See Fig.5/5A)
How to use
1. Peeled or cored the fruit or vegetables and then cut them into small dices.
2. Place the food to be blended into the jar. (See Fig.6). Usually, certain amount of purified
water has to be added to facilitate the smooth running of appliance. The proportion of the
food and water is 2:3.The amount of mixture should not exceed the max level as indicated
on the jar.
RECIPE
Note: never add boiling liquids into jar, or run the appliance empty.
3. Put the lid on the jar and be sure the measuring cup is in place.
4. Plug the power cord into a standard wall outlet.
5. Turn the speed knob to the appropriate speed setting for your task.
6. For quick or delicate blending tasks, turn the speed knob to P position and hold for a few
Handle
Locking /
Unlocking sign
