Connect the fan to the motherboard’s CPU fan header.
Depending on your CPU and the temperature inside the case,
you may interconnect the supplied NA-RC7 Low-Noise Adaptor
(L.N.A.) in order to further reduce the fan’s operating noise.
Caution: When using the L.N.A., check the temperature of your
CPU using appropriate software (e.g. the respective applications
of your motherboard manufacturer), in order to evade automatic
throttling of the CPU due to the increased temperature. If the cooling
performance is insufficient, please increase case ventilation or
remove the L.N.A..
Fan setup
6
Warranty, support and FAQs
!
Caution:
Please first take off the protection cover at the bottom
side of the heatsink.
Then put the heatsink onto the CPU and screw it to the screw
threads of the mounting bars. Note that you can reach through the
blades of the fan using the supplied screw driver. There is thus no
need to take off the fan for installation.
Perform 2-3 turns on each screw, then repeat until both are fully
tightened.
Fastening the heatsink to the CPU
5
Caution: Gently tighten the screws until they stop, but don’t use
excessive force (max. torque 0.6 Nm).
Even with high-grade products and strict quality control, the
possibility of defects cannot be eliminated entirely. Therefore,
we aim at providing the highest possible level of reliability and
convenience by offering a warranty period of 6 years and direct,
fast and straightforward RMA service.
Should you encounter any problems with your NH-L12 Ghost
S1 edition, please don’t hesitate to contact our support team
([email protected]).
Please also consult the FAQ section on our website:
www.noctua.at/faqs.
Noctua NH-L12 Ghost S1 Edition| Installation Manual
Scan this code to display multilingual manuals on
you mobile phone.
