trigger, as you might experience slight kick-back.
Pro tip:
Apply a little bit of counterforce in the opposite direction of kick-back when
releasing the trigger.
How to select and change the rotation direction
To prevent gear damage, always let the impact wrench come to a complete stop
before changing the direction of rotation.
✔
To move the anvil in a forwards/clockwise direction, push the rotational
direction switch to the
left of the center position (if holding the wrench in
your right hand with the anvil facing away from you, use your index finger
and push to the left).
✔
To move the anvil in a reverse/anticlockwise, push the rotational direction
switch through to the
right
of the center position (if holding the wrench in
your right hand with the anvil facing away from you, use your thumb finger
and push to the right).
Cordless power tools are always in operating condition
, which is why it is
important to
push the rotational direction switch to the center position
when you
aren’t using the tool or or are carrying it.
NB!
There are directional arrows either side of the rotational direction switch to
indicate forward/reverse.
15
