Here are some useful tips on how to reduce the chances that happening…
✔
✔
✔
✔
✔
✔
Always clamp your work securely to reduce the chance of movement and
vibration.
Always use the correct screws with the correct thickness, length, coarseness
and head type.
We’ve said it a few times now, but using self-tapping screws with pocket
holes is definitely the way to go.
Always use fine thread screws when working with hardwood. A fine thread
displaces less timber when being driven, reducing the chance of splitting.
Lubricate the screw with paraffin or beeswax to reduce friction when driving.
Before you drive a screw home, screw it part way out, then back in again.
This removes any wood shavings or sawdust from the hole, reducing the
chance of splitting.
Gluing workpieces
✔
✔
You can add extra strength to your joints if needed by applying wood glue
between the workpieces before driving in your screws.
After applying the glue you can immediately carry on with your job, as there
should be no need to wait for the glue to dry before using the pocket jig.
MAINTENANCE
Good news - there are no parts inside your clamp and jig set that require
professional maintenance. All that’s needed is some good old fashioned TLC - love
27
