Distributed by: NoCry LLC. 10785 W. Twain Ave. Suite 210, Las Vegas, 89135, NV, USA.
Made in Taiwan - 2022
www.nocry.com
ASSEMBLY INSTRUCTIONS
Follow the steps below to assemble your Forestry Helmet.
*The images used are for illustrational purposes. Your forestry helmet color may vary.
1.
Take all parts out of their original
packaging and place them on a flat,
soft working surface.
2.
The clear polycarbonate visor arrives
with a thin plastic film on both sides.
Remove the film from both sides.
3.
Attach the ear muffs by sliding their
connectors into the top of the cap
slots on each side of the helmet until
they click into place. Each ear muff
can be attached to either side. Rotate
and place the ear muffs in their
resting position on the back side of
the helmet to allow for easy further
assembly.
4.
Affix the visor support by sliding its
ends into the earmuff connector
slots on both sides of the helmet.
The support can be locked into three
different positions, allowing you to
adjust the depth position of the visor.
5.
Choose the visor you wish to attach
and fasten it to the visor support by
aligning the slots on top of the visor
with the locking system. Turn the
black knobs to lock the visor into place.
Make sure the visor can be raised and
lowered freely and is securely locked
in place.
N.B.:
We have also created a helpful
how-to assembly video
, together with online
instructions and larger images. You can find them at
www.nocry.com/instructions
or simply
by scanning the QR code on the side.
Should you have any questions or concerns, feel free to contact us at
.
We're always here to help.
