Nobu AK-20L, User Manual

Page: 15 / 64

13
CONTROL PADS ON THE DEHUMIDIFIER
NOTE: The control panel of the unit you purchased maybe slightly different according to the
models.
FAN
1 2 3 5 4 6
Control pads
When you push the button to change opera-
tion modes, the unit will make a beep sound to
indicate that it is changing modes.
➊
Power Pad
Press to turn the dehumidifier on and off.
NOTE: When the compressor startups or stops
running, the unit may make a loud voice, it is
normal.
➋
Mode Pad
Press to select the desired operation mode from
Dehumidifying, Dryer, Continuous dehumidifying
and Smart dehumidifying.
NOTE: Dryer and Smart dehumidifying modes are
optional.
➌ ➍
Down/Up Pads
• Humidity Set Control Pads
The humidity level can be set within a range of
35%RH(Relative Humidity) to 85%RH(Relative
Humidity) in 5% increments.
For drier air, press the pad and set to a lower
percent value(%).
For damper air, press the pad and set a higher
percent value(%).
• TIMER Set Control Pads
Use the Up/Down pads to set the Auto start and
Auto stop time from 0.0 to 24.
➎
Timer Pad
Press to initiate the Auto start and Auto stop fea-
ture, in conjuction with the and key pads.
➏
Fan Pad
Control the fan speed. Press to select either High
or Normal fan speed. Set the fan control to High
for maximum moisture removal. When the humidi-
ty has been reduced and quiet operation is pre-
ferred, set the fan control to Normal.