ASSEMBLY OF EXHAUST HOSE, HOSE INLET, HOSE OUTLET, WINDOW ADAPTOR
AND WINDOW SLIDER (Fig. 4)
• Extend each end of the exhaust hose by about 8cm and attach the hose inlet and hose outlet to
opposite ends by rotating the inlet/outlet in a counter clockwise direction approximately 3 to 4 turns, making sure
that the hose wire is well threaded into the hose inlet and outlet.
• Attach the window adaptor to the hose outlet by pressure fit.
• Clip the window adaptor into the window slider. Take care to not break the tabs on the window
adaptor when disconnecting from the window slider.
MOUNTING OF ASSEMBLED AIR EXHAUST HOSE
(Fig. 5)
• Take care not to damage the hose inlet when attaching/detaching at the back of the Air Conditioner.
• Slide the hose inlet (square end) in the direction indicated by the arrow onto the fixing lugs on hot air outlet
grill at the back of the appliance. Install carefully and do not force.
• Place the hose outlet to the nearest window. The length of the air exhaust hose is between 600mm
to 1500mm; use the minimum length when working.
• When mounting, try to keep the air exhaust hose horizontal and do not extend its length by attaching
it to another hose as this reduces the cooling efficiency of the appliance.
Fig. 17
Fig. 5
6
Fig. 4
window
slider
window
adapter
hose
outlet
hose hose
inlet
NOBOCOOL NC-42CP/C
