Important information:
The HUB communicates with receivers using radio signals. The HUB must be mounted on
a wall for optimal range. Some building materials, like reinforced concrete, mass timber,
etc. may reduce the signal range. In the case of signals not reaching a receiver, moving the
HUB 1-2 metres to the side could be enough to avoid the obstacle. Install the system, and
make sure all your receivers react properly, before final mounting of the HUB on the wall.
System setup:
Connect the power cord to the HUB and plug it into a power outlet.
The HUB must be connected by cable (Ethernet) to a local network with a wireless router,
or to a wall outlet elsewhere in the building.
Make sure your smartphone or tablet is connected to the same wireless network and start
the Energy Control App. When connected to power and a local network, the HUB will
transmit its ID code on the wireless network.
To install the HUB, follow the App setup wizard. The app will search for the HUB, and dis-
play the results on the screen. Press the ID code corresponding to your HUB.
1
Summary of Contents for HUB
Page 1: ...HUB SETUP ...
