OPERATION
10
Nobles Speed Scrub Orbital (12--2012)
4. Install the work pad onto the backer pad
(Figure 9).
FIG. 9
FILLING SOLUTION TANK
The machine is equipped with a hose fill--port at the
rear of the machine, and a bucket fill--port located at
the front of the machine (Figure 10).
Fill the solution tank to the “44 L MAX” level on the
solution tank sight gauge (Figure 10).
For Conventional Scrubbing:
Use hot water (60
C
maximum). Pour a recommended cleaning detergent
into the solution tank according to mixing instructions
on the container.
FOR
ec- H2O
SCRUBBING:
Use cool clean water only
(<21
C). Do not add any conventional floor cleaning
detergents, system failure may result.
FIG. 10
NOTE:
When filling the solution tank with a bucket,
make sure that the bucket is clean. Do not use the
same bucket for filling and draining the machine.
ATTENTION: For Conventional Scrubbing, only use
commercially approved cleaning detergents.
Machine damage due to improper detergent usage
will void the manufacturer’s warranty.
WARNING: Fire or Explosion Hazard.
Never Use Flammable Liquids.
FOR SAFETY: When using machine, follow mixing,
handling and disposal instructions on chemical
containers.
Summary of Contents for Speed Scrub Orbital
Page 71: ...STANDARD PARTS Nobles Speed Scrub Orbital 12 2012 42 WIRE HARNESS GROUP ec H2O OPTION 1 3 3 2...
Page 73: ...STANDARD PARTS Nobles Speed Scrub Orbital 12 2012 44 WIRE HARNESS GROUP CONSOLE 1...
Page 83: ...OPTIONS Nobles Speed Scrub Orbital 12 2012 54 PARKING BRAKE GROUP 1 3 4 5 6 7 8 2 9 10 3 11...
