manualshive.com logo in svg

Nobles SPEED SCRUB 350, Operator'S Manual

Share
Download
Nobles SPEED SCRUB 350 Operator'S Manual Download Page 21

21

Speed Scrub 350 9016424 (09-2017)

 OPERATION  

FILLING AUTOMATIC BATTERY WATERING 
TANK (OPTION)

FOR SAFETY: Before leaving or servicing 
machine, stop on level surface, turn off 
machine, and remove key.

1.  Lift the recovery tank to access the automatic 

battery watering tank. Drain recovery tank 
before lifting tank.

2.  Reposition the automatic battery watering tank 

so that it can be easily 

fi

 lled.

3.  Remove the blue cap from the automatic 

battery watering tank.

4.  Pour distilled water into tank. To avoid getting 

water on sensitive components, use a funnel to 

fi

 ll automatic battery watering tank.

FOR SAFETY: When using machine, only 
use distilled water when 

fi

 lling the automatic 

battery watering tank.

5.  When the tank needs re

fi

 lling, the automatic 

battery watering indicator will alert user to 
add distilled water. See CONTROL PANEL 
OPERATION for further details.

6.  Replace blue cap on automatic battery 

watering tank and return the automatic battery 
watering tank to the upright stowed position.

Summary of Contents for SPEED SCRUB 350



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands