OPERATION
Monsoon
t
(11--99)
5
3. Begin applying stripper by pushing machine at a
moderate walking pace.
FOR SAFETY: When using machine, go slow on
inclines and slippery surfaces.
DRAINING TANK
1. Raise dispenser assembly to transport position
and push machine to draining area.
2. To drain excess stripper solvent, remove drain
hose from holder and twist off drain hose plug.
3. Perform maintenance procedures before storing
machine.
MACHINE MAINTENANCE
AFTER EACH USE:
1. Remove and rinse out dispenser drip bar and
brushes.
2. Rinse out tank and clear hose thoroughly.
3. Clean machine housing with a nonabrasive,
non-solvent cleaner.
4. Periodically lubricate wheels and casters with a
water resistant oil.
TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
No solution flow.
Dispenser drip bar is plugged.
Unplug drip bar.
Solution flow lever not activated.
Activate lever.
Solution valve is plugged.
Replace or unplug valve.
Clear hose is plugged.
Remove and flush out.
SPECIFICATIONS
Model
Monsoon
t
LENGTH
840 mm ( 33 in)
WIDTH
480 mm (19 in)
HEIGHT
860 mm (34 in)
WEIGHT
29Kg (64.5 lbs)
DISPENSER ASSEMBLY WIDTH
810 mm (32 in)
TANK CAPACITY
76L (20 Gal)
SOLUTION FLOW RATE
14L (3.6 Gal) per minute (max. flow)
2509 Sq. meter (27,000 Sq. ft) per full tank
