EN
OPERATION
ASC- 15 / ASC- 57 (10- 11)
12
D:
BLOW DRYING AND SQUEEGEEING
1. Using glass squeegee tool (supplied with machine)
squeegee mirrors if applicable (Figure 19).
FIG. 19
2. Unwrap gray blower hose from machine handle
and connect hose at rear of machine, attach
blower nozzle to hose (Figure 20).
ATTENTION: Do not use black recovery hose
when blow drying. Contaminates will be blown
into the air.
FIG. 20
3. Press vacuum/blower switch towards blower
symbol to activate blower (Figure 21).
FIG. 21
4. Begin blow drying surfaces from top to bottom,
pushing rinse solution to floor. When finished, shut
off blower, wipe off hose and replace it on machine
(Figure 22).
FIG. 22
5. Assemble the double- bend wand, attach
squeegee tool and connect wand to black
recovery hose. Connect black recovery hose at
front of machine (Figure 23).
FIG. 23
6. Press vacuum/blower switch towards vacuum
symbol (Figure 24).
FIG. 24
