Noblelift PS10M, Service Maintenance Manual

Page: 5 / 60

4

It should be noted that the machines hydraulic systems operate at
extremely high potentially dangerous pressures. Every effort should
be made to relieve any system pressure prior to disconnecting or
removing any portion of the system. Relieve system pressure by
cycling the applicable control lowering button several times with the
motor stopped and ignition on, to direct any line pressure back into
the reservoir. Pressure feed lines to system components can then
be disconnected with minimal fluid loss.

Remove all rings, watches and jewelery when performing any maintenance.

Wear well-fitting helmet, safety shoes and working Clothes When
drilling grinding or hammering always. Wear protective goggles.
Always do up safety clothes properly so that they do. Not catch on
protruding parts of machines. Do not wear oily clothes. When
checking, always release battery plug. DO NOT WEAR LONG
HAIR UNRESTRAINED, OR LOOSE-FITTING CLOTHING AND
NECKTIES WHICH ARE APT TO BECOME CAUGHT ON OR
ENTANGLED IN EQUIPMENT.

During maintenance do not allow any unauthorized person, to
stand near the machine.

Flames should never be used instead of lamps. Never use a buring
flame to check leaks or the level of oil or electrolyte.

Immediately remove any oil or grease on the floor of the operator’s
compartment or on the handrail. It is very dangerous if someone slips
while on the machine.

Always use the recommended pure oil or grease, and be sure to use
clean containers.

Oil is a dangerous substance. Never handle oil, grease or oily
clothes in places where there is any fire or flame. As preparation
for use of fire extinguishers and other fire- fighting equipment.

Keep the battery away from fire hazards. The generated gases are
explosive.

Store all the oils in a specified place.

Keep the flammable things away from the machine. Do not smoke
in the working site.

Battery should always be disconnected during replacement of electrical components.

Always use the grades of grease and oil recommended by NOBLELIFT choose the viscosity
specified for the ambient temperature.