3 OF 4
Step 5
Stand the chair rightside up.
Now, fully and securely, tighten all nuts, at all joints.Add Rubber Caps(K) on all bolt
ends to protect skin or clothing from getting snagged.
Adjust the Pre-attached levellers at the bottoms of the chair legs until the chair is level with
the ground.
Your chair is ready for use.
Attach the Chair Seat Panel(B) with Right Leg(C) using Washers, Spring Washers
and Nuts(H) with Spanner(J)
DO NOT overtighten.
Step 3
Then attach the Backrest Panel(A) to the top end of the Right Leg(C) using Washers,
Spring Washers and Nuts(H) with Spanner(J)
DO NOT overtighten.
Step 4
Connect the Left Leg(D) with the Chair Seat Panel(B) & Backrest Panel(A) using Washers,
Spring Washers and Nuts(H) with Spanner(J)
Step 4 follows the same process as Step 3 above.
DO NOT overtighten.
Backrest Panel
This is the
preattached Seat
Panel to RIGHT LEG.
Summary of Contents for PHENIX
Page 4: ...4 OF 4 ...
Page 8: ...4 OF 4 ...
