Stand the Chair up.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Step 6
Finally, seal the Seat Base Cover back on to the underside of the
chair seat . Turn it the right side up.The chair is ready for use.
Step 5
Place the chair on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the chair to some 30cm to 50cm height from the ground.
Keep your feet and toes well away from the drop zone.
Drop the chair freely and vertically with the four legs, hitting the ground, at
the same time.
This Drop Test will help to ensure that all the bolts and gaps to all reach full
alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles found, proceed to tighten all the bolts.
CAUTION : When tightening these bolts, tighten sequentially.
DO NOT tighten any screw fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbles, loosen the bolts and execute this same drop tests.
WARNING!! IF CHAIR IS NOT STABLE , IT COULD LEAD TO DAMAGING
THE PRODUCT.
Noble house Home Furnishings LLC
5 OF 6
