Adjust Pre-installed Levellers
height for balance
Assembly Steps
With the assistance of your adult partner, stand the Table up.
Then EXERT pressure floorwards onto the Table with both hands.
This pressure will help the Table reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts and Screws at all joints until evenly
secured.
Inspect the Table and make sure all parts are adequately connected.
Adjust the Levellers until the Table is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold
the Table while you are working.
Your Table is ready to be used.
This Table can only be used on a flat, level surface.
10 OF 11
Step 10
