Step 4
Step 5
Stand the Bench right side up.
Now, fully and securely, tighten all Bolts, at all joints.
Adjust the Legs pre-installed Levellers until the Bench is level with the ground.
Your Bench is ready for use.
This Bench can only be used on a flat, level surface.
Attach Supporting Rod(C) between Chair Legs with pre-attached Levellers(B) using
Washers(
②
), Spring Washers(
③
) and Hex Bolts(
④
) with Spanner(
⑤
).
Do not fully tighten the Bolts.
Adjust height
for balance
Adjust low for
balance
Noble house Home Furnishings LLC
Page 5 OF 6
