Step 4
With the assistance from your adult partner, stand the Barstool up.
Inspect it and make sure all parts are adequately connected.
Carefully sit onto the Barstool. This pressure will help align all parts at all joints.
Then get off the Barstool and proceed to tighten the Bolts and Screws in a
sequential manner.
When tightening the Bolts and Screws tighten sequentially.
DO NOT tighten any Bolt or Screw fully and then move on towards the
next one.
If there are any wobbles after tightening, loosen the Bolts and Screws
and execute this same process.
Adjust the Levellers until the Barstool is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean
and hold the Barstool while you are working.
Your Barstool is ready for use.
This Barstool can only be used on a flat, level surface.
Adjust Pre-installed
Levellers height for balance
Adjust high for balance
Adjust low for balance
Noble House Home Furnishings LLC
7
